Diamond ground, professionally coated, built to last. The Epoxy Company serves Waco and the surrounding Central Texas communities with the same system that's earned us a 5.0★ rating across 120+ reviews from real homeowners.
The Epoxy Company makes the trip to Waco and Central Texas for clients who want a floor done right. We've seen what happens when coatings are applied over poorly prepped concrete, and we're not that crew. Every install starts with industrial diamond grinding and ends with a polyaspartic topcoat built for Texas heat.
If you're in Waco and tired of getting quotes from contractors who cut corners on prep, give us a call. We'll tell you exactly what your concrete needs and what it'll take to make it last.
Waco has changed a lot since the Magnolia and Silo District boom brought national attention and a wave of renovation and new construction to McLennan County. We see both sides of that growth, older homes near Baylor and downtown getting fully renovated, garage and all, and brand-new subdivisions pushing out along the Highway 6 loop and toward Woodway and Hewitt. Central Texas concrete also deals with a different challenge than our home territory further north, longer stretches of extreme heat and drought that cause the soil to shrink and expand more dramatically, which puts real stress on a slab over the years.
Every install in Waco starts with diamond grinding and ends with a polyaspartic topcoat. The difference is in the layers.
Every contractor promises a great floor. Here's what we actually do differently.
"Best garage floor I’ve ever seen. The Epoxy Company showed up on time, kept everything clean, and the final product is absolutely incredible. My neighbors can’t stop asking who did it."
"I got three quotes. They were the only company that explained exactly what prep work they do. I went with The Pro package and two years later it still looks brand new."
"They drove out to our place, no complaints, no extra fees. Done our 3-car garage in two days. Looks like something out of a magazine. Highly recommend."
The Epoxy Company installs epoxy and polyaspartic floors throughout Waco and the surrounding Waco & McLennan (Central) area. Not seeing your town? We cover all of North, East & Central Texas, just ask.
McLennan County sees some of the most extreme heat and drought swings in our whole territory, and that combination is genuinely hard on concrete over time. When clay soil dries out during a Central Texas summer it shrinks, and when it rehydrates during fall and spring rain it swells back up, and that repeated movement stresses a slab in ways homeowners rarely think about until they see cracking or a coating starting to lift. We check for that kind of movement and existing crack damage on every Waco estimate before quoting a job, since a coating applied over active movement is set up to fail regardless of how well it's installed.
Waco's renovation boom, driven in large part by the attention Magnolia and the Silo District brought to the city, means we're seeing more older homes near Baylor and downtown getting fully updated, garages included. A lot of that older concrete is carrying a builder-grade coating or paint from decades back that has to come off completely before we can install anything new, which we handle as part of the diamond grinding process rather than a separate line item that surprises you mid-job. On the newer side, subdivisions expanding along the Highway 6 loop toward Woodway, Hewitt, and Robinson are pouring fresh concrete regularly, and those slabs get a moisture check before we ever assume they're ready to coat.
Every Waco install still starts with the same non-negotiable diamond grind, no acid wash shortcuts, and finishes with a UV-stable polyaspartic topcoat that holds up to the intense Central Texas sun without yellowing or chalking the way a straight epoxy topcoat can after a few summers.
The Base is a solid, honest flake floor for a slab that tests dry and shows no signs of active movement, diamond ground, epoxy base, full flake broadcast, polyaspartic topcoat. The Pro is what most Waco homeowners choose, given how much McLennan County clay moves through the year, since it adds the moisture vapor barrier primer and a polyurea base coat with better flex and bond strength than standard epoxy. The Flagship is our top build, a full polyaspartic base with two topcoats for the deepest gloss we offer, popular with homeowners finishing out a garage as a second living space or a showroom for a car collection, and it's the build we recommend most on slabs that have already shown some movement.
Most two-car garages take two working days. Day one is the grind and base coat, we open the concrete surface, vacuum and clean it thoroughly, handle any crack repair or old coating removal, then lay the base coat and broadcast flake to full rejection while it's still tacky. Day two, once the flake has cured and been scraped back smooth, we roll the polyaspartic topcoat. Central Texas summer heat actually works in our favor here, polyaspartic cures fast in warm conditions, and most homeowners can walk the floor within about a day and drive on it within a few days. We'll give you the real timeline for your specific job before we start.
We run Simiron base coats and Torginol flake on every Waco job, chosen because Simiron's slow-cure formulas give the material time to fully wet into a freshly diamond-ground profile before setting, even on a hot Central Texas afternoon where a faster product might skin over too soon. Torginol flake holds its color through years of intense sun exposure, and our polyaspartic topcoat stays UV stable rather than yellowing or chalking, exactly the kind of failure that shows up on a lot of the older, sun-worn Waco slabs we get called out to fix.
A properly installed polyaspartic system needs very little maintenance. Dust mop or sweep for everyday dirt, warm water and mild soap with a soft brush for anything tougher, and the floor is safe to power wash once fully cured. Wipe up oil, fertilizer, and pool chemicals promptly rather than letting them sit, since chemical resistant doesn't mean chemical proof over a long soak. No waxing, no annual resealing, just a floor built to hold up on its own for years.
Ready to see what your Waco garage could look like? Call or text 817-818-6925 for a free estimate. We come to you, look at your actual concrete, and give you an honest recommendation.
Acid etching is a common shortcut for prepping concrete, and it's a particularly poor fit for the kind of movement McLennan County slabs go through. The chemical reaction that roughens the surface is inconsistent even under ideal conditions, and it does nothing to address a slab that's already showing hairline cracking from drought-cycle movement. It also can't remove an existing coating, which matters a great deal on Waco's older renovated homes carrying decades-old paint or DIY epoxy. Diamond grinding is mechanical rather than chemical, so it performs consistently regardless of the concrete's condition. We choose the diamond bond and grit sequence to match your actual slab, strip whatever coating is already there, and leave a uniform profile the new system can grip into across the entire floor.
It's more labor-intensive than an acid wash, which is exactly why it's not the default for contractors racing to underbid each other on price. But it's the single biggest factor in whether your Waco floor lasts five years or fifteen, and it's non-negotiable on every install we run here, regardless of which package a homeowner ultimately chooses.
A good amount of our Central Texas work isn't inside Waco city limits at all. Hewitt, Woodway, Robinson, China Spring, and the acreage properties scattered through McLennan County all get the same standard we'd apply on any Waco street, sometimes with a bigger garage or shop bay poured to handle equipment rather than just daily drivers. Barndominiums and rural shop buildings are common out here too, and we adjust our grind sequence and topcoat build to match how dense the slab is and how the space actually gets used, whether it's a weekend hobby shop or a working ranch property.
Whatever the address, being outside the Waco city grid has never meant a longer wait or a different level of care. Same crew, same materials, same standard, whether the job is a downtown bungalow garage or a shop building out past the city line.
Waco gets its share of attention from national garage-flooring franchises given the city's growth and higher profile in recent years. It's worth knowing what you're comparing when you weigh a franchise quote against ours. Franchise operations frequently subcontract the physical install to whoever is available that week, meaning the crew installing your floor may not be the same people, or held to the same standard, from job to job. With us, the person who quotes your garage is the same person on the grinder and the same person rolling the topcoat. When comparing bids, ask each contractor whether they diamond grind or acid etch, whether they test for cracking or moisture before coating, and exactly who does the physical work. Those three questions cut through the marketing fast, and the answers tend to make the decision easy.
The estimate takes about fifteen to twenty minutes. We walk the garage, check the slab for cracks, existing coatings, and signs of movement given McLennan County's clay soil, measure the actual square footage, and talk through which system fits how you use the space. You'll get a firm price before we leave, not a vague range to chase down later, and we schedule the install around your calendar instead of making you wait weeks for an opening. Bring your questions, we'd rather answer them standing on your actual concrete than have you guessing after we've already left.
Every install we complete in Waco comes with a workmanship warranty. We can offer that confidently because of how the floor is actually built, diamond grinding and crack assessment take real time upfront, but they're also why failures are rare. If something about our installation does go wrong, we make it right. A manufacturer's warranty on the coating material alone typically doesn't cover installation failures caused by skipped prep, so ask any Waco contractor exactly what their warranty covers, in writing, before you sign anything or hand over a deposit.
A lot of Waco garages we coat serve more than one purpose, home gyms, workshops with a welding station, or oversized bays for working on cars and trucks on weekends. Each of those uses changes what we recommend. A floor that sees a squat rack moved daily needs a coating tough enough to handle repeated abrasion in the same spots, and a workshop with real tool use benefits from the heavier build and added chemical resistance of The Flagship system. Tell us how you actually plan to use the space during your estimate, and we'll recommend the tier that fits rather than assuming every garage is the same.
We know Waco is a real trip from our home base in Denison, and we plan the route accordingly rather than treating the distance as a reason to shortchange the job. Diamond grinders, HEPA dust collection, coatings, and flake all come along in one trip, and a Waco garage gets the identical process and attention as anything twenty minutes from the shop. If you've been holding off on a quote because you assumed Central Texas was out of reach, that hasn't been our experience. Call or text 817-818-6925 and we'll get you scheduled.
Whether your address is a bungalow near Baylor, a new build off Highway 6, or a shop building out past China Spring, the process doesn't change: an honest look at your actual concrete, a real diamond grind, materials we trust, and a straight answer about what your floor actually needs. That's the standard we hold everywhere in North, East, and Central Texas, and Waco is no exception.
Most Waco garage floors run about $6 to $10 per square foot installed. The Base system starts at $6, The Pro at $8, and The Flagship at $10. Your exact price depends on the size and condition of your concrete, and every estimate is free.
Most residential floors in Waco are finished in one to two days. We diamond grind the concrete, lay the base coat and flake, then return for the polyaspartic topcoat. You can usually walk on it the next day and park on it within a few days.
Yes. A properly prepped floor resists hot tires, oil, and chemicals, cleans up with a mop, and lasts for years without peeling. In the Waco heat and clay soil, the prep and moisture barrier we use are what keep it down for the long haul.
Dry, our flake floors have real texture and the polyaspartic topcoat is rated for traction. Any hard floor gets slick when wet, so for extra grip we can add an aluminum oxide anti-slip additive to the topcoat for a little more.
Yes. The Epoxy Company is based in Denison and covers Waco and the surrounding area. Garages, shops, and barndominiums are what we do best, and estimates are always free. Call 817-818-6925.
We let the work speak. We diamond grind every floor, use quality Simiron and Torginol materials, coat clean out to the door, and back it with a workmanship warranty. Call 817-818-6925 for a free Waco estimate.
It can. McLennan County clay soil shrinks and swells more dramatically through heat and drought cycles than soil further north, which stresses concrete slabs over time. We check for active cracking or movement before quoting a job so we know exactly what your floor needs.
Yes. Removing an old, failing coating is part of our diamond grinding process. We strip it completely and profile the bare concrete underneath so the new system bonds directly to the slab instead of to whatever is already peeling off of it.
Free estimate for Waco homeowners. We come to you, assess the concrete, and give you an honest recommendation with no pressure.