Diamond ground, professionally coated, built to last. The Epoxy Company serves Frisco and the fast-growing neighborhoods around it with the same system that's earned us a 5.0★ rating across 120+ reviews from real North Texas homeowners.
If you're in Frisco, TX and searching for a garage floor that looks as sharp as the neighborhood, you've found the right crew. The Epoxy Company serves Frisco and the surrounding DFW area with professional epoxy and polyaspartic flooring systems built to last through Texas summers, heavy traffic, and everything in between.
We're not a big-box referral service. You get our actual crew, the same team that diamond grinds every floor, broadcasts every flake, and rolls every coat of polyaspartic topcoat. No subcontractors. No shortcuts.
Frisco is one of the fastest-growing cities in the country, and that growth means we see two very different kinds of concrete here. There's the wave of new construction in developments like Phillips Creek Ranch, The Grove, and the areas around PGA Frisco, slabs poured in the last few years that are often still curing and need a moisture check before anything goes on top. And there's the older Frisco housing stock closer to downtown and historic Main Street, where a slab might be twenty-plus years old and carrying a builder-grade coating that's already starting to peel. We treat those two situations completely differently, because they are completely different jobs even if the finished floor looks the same.
Every install in Frisco starts with diamond grinding and ends with a polyaspartic topcoat. The difference is in the layers.
Every contractor promises a great floor. Here's what we actually do differently.
"Best garage floor I’ve ever seen. The Epoxy Company showed up on time, kept everything clean, and the final product is absolutely incredible. My neighbors can’t stop asking who did it."
"I got three quotes. They were the only company that explained exactly what prep work they do. I went with The Pro package and two years later it still looks brand new."
"They drove out to our place, no complaints, no extra fees. Done our 3-car garage in two days. Looks like something out of a magazine. Highly recommend."
The Epoxy Company installs epoxy and polyaspartic floors throughout Frisco and the surrounding Collin County & North Suburbs area. Not seeing your town? We cover all of North, East & Central Texas, just ask.
New-build Frisco garages are a specific kind of job. The concrete is often only months old, which means it can still be releasing moisture as it fully cures, even though it looks perfectly dry to the eye. We test before we coat rather than trusting a new-construction slab just because it's new, since coating over concrete that's still off-gassing is exactly how a brand-new garage ends up with a bubbling floor within the first year.
Builder-grade concrete in Frisco also tends to come troweled very smooth, almost polished, straight from the form. That finish looks fine on its own, but it's a poor surface for a coating to grip, which is why some DIY epoxy kits fail within months on new Frisco homes. Our diamond grind opens that smooth surface up mechanically so the base coat has something to actually bond into, rather than sitting on top of a slick trowel finish waiting for an excuse to lift.
On the flip side, older Frisco neighborhoods closer to downtown and Main Street often have a slab wearing thirty-plus years of a builder-grade paint or a DIY epoxy kit that never held up. That has to come off completely before we coat, which is part of the diamond grinding process rather than a separate line item most contractors quote around. Skipping that step and coating directly over failing paint just guarantees the new coating fails with it.
The Base is a solid, honest flake floor for anyone on a tighter budget or a slab that tests dry, diamond ground, epoxy base, full flake broadcast, polyaspartic topcoat, and it still holds up to years of daily traffic. The Pro is what most Frisco homeowners choose, since it adds the moisture vapor barrier primer that matters most on the newer pours we see so much of here, plus a polyurea base coat with more flex and better bond strength than standard epoxy. The Flagship is our top build, a full polyaspartic base and two topcoats for a deep, showroom-grade gloss, and it's a popular pick for Frisco garages that double as a second living space, workout room, or a place to show off a car collection.
Whichever tier fits your goals and your budget, every one of them starts with the same non-negotiable diamond grind and ends with a UV-stable polyaspartic topcoat that won't yellow or chalk out under the Frisco sun the way a straight epoxy topcoat can.
Most Frisco garages take two working days. Day one is the grind and base coat: we open the concrete surface, vacuum and clean it thoroughly, address any cracks or old coating, then lay the base coat and broadcast flake to full rejection while it's still tacky. Day two, once the flake has cured and been scraped back smooth, we roll the polyaspartic topcoat. Because polyaspartic cures fast, most homeowners can walk the floor within about a day and park on it within a few days, considerably faster than a straight epoxy system that can need a week or more before it's ready for real traffic.
Bigger jobs, oversized three-car garages or shop bays on Frisco's larger lots, can run a bit longer, and we'll tell you the real timeline up front rather than a generic estimate that doesn't match your actual square footage.
Frisco gets heavily targeted by national garage-flooring franchises, and it's worth understanding the difference before you compare bids. A franchise often subcontracts the physical install, which means the crew that shows up to do the work may not be the same people, or the same standard, from one job to the next. With us, the person who walks your garage and quotes the job is the same person on the grinder and rolling the topcoat. There's no gap between the sales pitch and the actual installer.
When you're comparing quotes, ask both companies whether they diamond grind or acid etch, whether they test for moisture before coating, and exactly who will be doing the physical work. Those three questions cut through the marketing faster than anything else, and the answers usually make the decision for you.
Once installed, a polyaspartic system needs very little upkeep. Dust mop or sweep for everyday dirt, since nothing grinds into the sealed surface the way it does on bare concrete. Warm water, a mild soap, and a soft brush handle anything tougher, and the floor is safe to power wash once fully cured, just keep the nozzle a reasonable distance back. Wipe up oil, coolant, or fertilizer promptly rather than letting it sit, since chemical resistant doesn't mean chemical proof over a long soak. Beyond that, there's no waxing and no annual resealing required.
Ready to see what your Frisco garage could look like? Call or text 817-818-6925 for a free estimate. We come to you, look at your actual concrete, and tell you honestly which system fits.
We run Simiron base coats and Torginol flake on nearly every Frisco job, not because of a supplier arrangement, but because we've tested cheaper alternatives over the years and watched them underperform on North Texas concrete, especially in the summer heat a Frisco garage sees with the door shut most of the day. Simiron's slow-cure formulas stay workable longer, giving the material time to fully wet into a freshly diamond-ground profile before it starts to set, instead of skinning over before it's had the chance to bond properly. Torginol flake holds its color instead of fading after a couple of summers behind a west-facing garage door, which matters on the newer Frisco homes with those big, sun-exposed bays.
The topcoat is where the difference really shows over time. We run polyaspartic rather than a straight epoxy topcoat because polyaspartic stays UV stable, meaning it resists yellowing and chalking in a way a lot of epoxy-only systems simply can't after enough direct sun. It costs more to build a floor this way than to run whatever's cheapest, but it's the reason floors we installed in Frisco years ago still look freshly done today.
A lot of Frisco garages aren't just for parking cars anymore. We coat plenty of floors that double as home gyms, workshop space for weekend projects, or a spot to store and work on a car collection, and each of those uses changes what we recommend. A garage that sees a squat rack and rubber gym flooring rolled out and put away regularly needs a coating tough enough to handle repeated abrasion in the same spot. A workshop bay with a welding station or a lot of tool use benefits from the heavier build and extra chemical resistance of The Flagship. We ask how you actually plan to use the space before we recommend a tier, rather than assuming every garage gets the same two cars and nothing else.
Some of our Frisco customers are also finishing out casitas, detached shops, or oversized three and four-car garages on larger lots toward the edges of the city, spaces that start to blur the line between a garage and a small barndominium. Those get the same standard we'd apply to any shop floor: a careful moisture check given the newer concrete, a grind sequence matched to the slab's density, and a heavier topcoat build if the space is going to see real daily use rather than just car storage.
Whatever the space, the estimate is free and the standard doesn't change based on square footage or how fancy the build is. A two-car garage and a four-bay shop both get the same diamond grind, the same moisture check, and the same honest recommendation on which system actually fits.
The estimate itself usually takes fifteen to twenty minutes. We walk the garage, check the slab for cracks, existing coatings, and moisture concerns, measure the square footage, and talk through which system fits how you actually use the space. You'll get a firm price before we leave, not a vague range you have to chase down later by phone, and we schedule the install around your calendar instead of making you wait weeks for an opening.
Bring your questions. Ask what happens if we find damage under an old coating once we grind it off, ask how pricing changes if the garage measures out bigger than expected, ask exactly what the workmanship warranty covers. A contractor who answers those plainly, standing on your actual concrete, tells you more than any glossy brochure or five-star review ever could, and it sets the tone for the rest of the job.
A lot of cheaper garage-floor quotes in Frisco still lean on an acid etch to prep the concrete instead of a mechanical diamond grind, and it's worth understanding why that shortcut costs you in the long run. Acid etching uses a chemical reaction to lightly roughen the surface of the slab, but it can't remove an existing coating, can't fix a slick trowel finish on new construction, and produces an inconsistent profile that varies with how the acid happened to react with your particular concrete that day. Diamond grinding is mechanical and controlled. We choose the diamond bond and grit sequence based on your actual slab, and it removes old coatings, opens dense concrete evenly, and leaves a consistent surface profile the base coat can grip into everywhere, not just in the spots where the chemistry happened to work.
It's a more labor-intensive process, which is part of why it's not the default for contractors racing to underbid each other on price. But it's the single biggest factor in whether a coating lasts five years or fifteen, and it's non-negotiable on every floor we install in Frisco, regardless of which package you choose. When you're comparing bids, that one question, diamond grind or acid wash, is worth asking before price ever enters the conversation.
Most Frisco garage floors run about $6 to $10 per square foot installed. The Base system starts at $6, The Pro at $8, and The Flagship at $10. Your exact price depends on the size and condition of your concrete, and every estimate is free.
Most residential floors in Frisco are finished in one to two days. We diamond grind the concrete, lay the base coat and flake, then return for the polyaspartic topcoat. You can usually walk on it the next day and park on it within a few days.
Yes. A properly prepped floor resists hot tires, oil, and chemicals, cleans up with a mop, and lasts for years without peeling. In the Frisco heat and clay soil, the prep and moisture barrier we use are what keep it down for the long haul.
Dry, our flake floors have real texture and the polyaspartic topcoat is rated for traction. Any hard floor gets slick when wet, so for extra grip we can add an aluminum oxide anti-slip additive to the topcoat for a little more.
Yes. The Epoxy Company is based in Denison and covers Frisco and the surrounding area. Garages, shops, and barndominiums are what we do best, and estimates are always free. Call 817-818-6925.
We let the work speak. We diamond grind every floor, use quality Simiron and Torginol materials, coat clean out to the door, and back it with a workmanship warranty. Call 817-818-6925 for a free Frisco estimate.
Yes, especially on new construction. A slab can look and feel dry while it is still curing and releasing moisture underneath. We test before we coat so we know whether a moisture vapor barrier primer is actually needed, rather than assuming new concrete is automatically ready.
Yes. Removing old, failing coatings is part of our diamond grinding process. We grind the old material off and profile the bare concrete underneath so the new system bonds directly to the slab instead of to whatever is peeling off of it.
Free estimate for Frisco homeowners. We come to you, assess the concrete, and give you an honest recommendation with no pressure.