5-Star Rated Epoxy Flooring
McKinney sits in one of the fastest-growing areas in North, East & Central Texas. New construction means fresh concrete, and fresh concrete still needs proper diamond grinding and moisture vapor barrier prep to hold a coating long-term. We do it right, on new builds and decades-old slabs alike.
Looking for a garage floor in McKinney that can stand up to Texas heat? The Epoxy Company installs epoxy and polyaspartic flooring across McKinney and the wider Collin County & North Suburbs area. Every job starts with diamond grinding, the prep step that keeps a floor bonded through years of hot summers and shifting North, East & Central Texas clay.
McKinney has been one of the fastest-growing cities in the country for years running, and that shows in the concrete we see. New subdivisions off US-380 and around Craig Ranch mean a lot of slabs that are only a year or two old, still settling and sometimes still releasing moisture even though they look bone dry. At the same time, McKinney's historic downtown square sits surrounded by older homes with concrete that's fifty, sixty years old, poured long before anyone thought about moisture vapor barriers. Both extremes show up on our schedule regularly, and neither one gets a one-size-fits-all approach.
We treat every McKinney estimate as its own project. New construction gets tested for moisture before we ever quote a moisture vapor barrier as optional, and older slabs get checked for existing coatings, cracking, and how the concrete has weathered decades of Collin County summers. It's a longer process than just measuring square footage and emailing a number, but it's the only way to actually know what your floor needs.
Every job starts with diamond grinding. Every package includes real prep. Here's how the tiers differ.
We grind every slab before coating. No acid wash shortcuts. Diamond grinding opens the concrete's pores so the coating actually bonds, not just sits on top.
North, East & Central Texas clay soil pushes moisture vapor through concrete slabs. Our moisture vapor barrier primer stops that before it causes delamination. Most competitors skip it.
UV-stable, flexible, fast-curing. Polyaspartic handles Texas heat without yellowing or peeling, and you're driving on it same day in most cases.
The crew that shows up is our crew. We don't broker your job to whoever is available that week. Same standards, same materials, same people, every single time we show up.
"Best garage floor I’ve ever seen. The Epoxy Company showed up on time, kept everything clean, and the final product is absolutely incredible. My neighbors can’t stop asking who did it."
"I got three quotes. They were the only company that explained exactly what prep work they do. I went with The Pro package and two years later it still looks brand new."
"They drove out to our place, no complaints, no extra fees. Done our 3-car garage in two days. Looks like something out of a magazine. Highly recommend."
The Epoxy Company installs epoxy and polyaspartic floors throughout McKinney and the surrounding Collin County & North Suburbs area. Not seeing your town? We cover all of North, East & Central Texas, just ask.
McKinney's new-construction boom means a lot of the garages we quote have concrete that's barely had time to cure. Fresh slabs can look and feel completely dry to the touch while still releasing moisture from underneath, and coating over that moisture is one of the most common reasons a brand-new garage floor bubbles or delaminates within the first year. We test for it on every new-build estimate rather than assuming young concrete is automatically ready, and that reading is what tells us honestly whether the moisture vapor barrier on The Pro and Flagship tiers is worth the extra cost on your particular slab.
New-construction concrete also tends to come troweled very smooth straight from the builder, almost polished. That finish looks clean, but it gives a coating almost nothing to grip onto, which is why some of the peel-and-stick or DIY epoxy kits homeowners try on brand-new McKinney garages fail within months. Our diamond grind opens that slick surface up mechanically, creating a real mechanical profile for the base coat to lock into instead of just sitting on top of a smooth trowel finish.
On the older side of McKinney, closer to the historic square and the neighborhoods that have been there for decades, we run into a different problem: a slab carrying an old builder-grade paint or a failed DIY coating that has to come off before we can start. Removing that is built into our diamond grinding process rather than being a surprise add-on once we're already on site, and skipping that step to save time just guarantees the new coating fails right along with whatever it was applied over.
The Base is a genuinely solid flake floor for a slab that tests dry and a homeowner who wants a clean, durable finish without the moisture vapor barrier. Diamond grind, epoxy base, full flake broadcast, polyaspartic topcoat, it holds up to years of daily use. The Pro is what most McKinney homeowners end up choosing, largely because of how much new construction we see here, since it adds the moisture vapor barrier and a polyurea base coat with better flex and bond strength than standard epoxy. The Flagship is the top of the line, a full polyaspartic base with two topcoats for the deepest gloss we offer, and it's popular with McKinney homeowners turning their garage into a second living space, home gym, or a showroom for a car collection.
Whichever tier fits your budget and your goals, every one of them starts with the same non-negotiable diamond grind and finishes with a UV-stable polyaspartic topcoat that resists the yellowing and chalking a straight epoxy topcoat can develop after enough North Texas sun.
Most two-car garages take two working days. Day one is the grind and base coat, we open the concrete surface with our diamond equipment, vacuum and clean it thoroughly, handle any crack repair or old coating removal, then lay the base coat and broadcast flake to full rejection while it's still tacky, meaning we keep throwing flake until the surface physically can't hold any more. Day two, once the flake has cured and been scraped back smooth, we roll the polyaspartic topcoat. Because polyaspartic cures fast, most homeowners can walk the floor within about a day and drive on it within a few days, well ahead of the timeline some straight-epoxy systems require.
Bigger jobs, oversized three-car garages or detached shop buildings on McKinney's larger lots, can run a bit longer, and we give you the real timeline for your specific space before we ever start, not a generic number that doesn't match your actual square footage.
McKinney gets plenty of attention from national garage-flooring franchises, and it's worth understanding what you're actually comparing when you weigh those quotes against ours. A franchise operation frequently subcontracts the physical install to whoever's available that week, so the crew installing your floor may not be the same people, or held to the same standard, from one job to the next. With us, the person who walks your garage and quotes the job is the same person on the grinder and the same person rolling the topcoat. When you're comparing bids, ask both companies whether they diamond grind or acid etch, whether they test for moisture before coating, and exactly who does the physical work. Those three answers tend to make the decision easy.
We run Simiron base coats and Torginol flake on nearly every McKinney job, not from a supplier deal but because we've tested cheaper alternatives and watched them underperform in North Texas heat. Simiron's slow-cure formulas stay workable longer, giving the material time to fully wet into a freshly diamond-ground profile before it sets, rather than skinning over before it's had the chance to bond properly on a hot Collin County afternoon. Torginol flake holds its color instead of fading after a couple of summers behind a west-facing garage door, which matters on the newer McKinney homes with those big, sun-exposed bays.
The topcoat is where that investment really pays off over time. We run polyaspartic instead of a straight epoxy topcoat because it stays UV stable, resisting the yellowing and chalking that plenty of epoxy-only systems develop after enough direct sun. It costs more to build a floor this way than to run whatever's cheapest, but it's why floors we installed in McKinney years ago still look freshly finished.
Once installed, a polyaspartic system needs very little upkeep. Dust mop or sweep for everyday dirt, since nothing grinds into the sealed surface the way it does on bare concrete. Warm water, a mild soap, and a soft brush handle anything tougher, and the floor can be power washed once fully cured, just keep the nozzle a reasonable distance back. Wipe up oil, coolant, or fertilizer promptly rather than letting it sit for days, since chemical resistant doesn't mean chemical proof over a long soak. Beyond that, there's no waxing and no annual resealing required, a properly installed system is built to be lived on.
Ready to see what your McKinney garage could look like? Call or text 817-818-6925 for a free estimate. We come to you, look at your actual concrete, and tell you honestly which system fits.
A lot of cheaper quotes in McKinney still lean on an acid etch to prep the concrete instead of a mechanical diamond grind, and it's worth understanding why that shortcut costs you down the line. Acid etching uses a chemical reaction to lightly roughen the surface, but it can't remove an existing coating, can't correct a slick trowel finish on new construction, and produces an inconsistent profile that varies with how the acid happened to react with your particular slab that day. Diamond grinding is mechanical and controlled. We choose the diamond bond and grit sequence based on your actual concrete, and it strips old coatings, opens dense new slabs evenly, and leaves a consistent surface the base coat can grip into everywhere, not just where the chemistry happened to work.
It's more labor-intensive, which is part of why it's not the default for contractors racing to underbid each other on price. But it's the single biggest factor in whether a coating lasts five years or fifteen, and it's non-negotiable on every floor we install in McKinney, regardless of which package you choose. When you're comparing bids, that one question is worth asking before price ever enters the conversation.
The estimate itself usually takes fifteen to twenty minutes, longer for bigger shops or barndominium-style bays. We walk the garage, check the slab for cracks, existing coatings, and moisture concerns, measure the actual square footage, and talk through which system fits how you plan to use the space. You'll get a firm price before we leave, not a vague range you have to chase down later by phone, and we schedule the install around your calendar instead of making you wait weeks for an opening.
Bring your questions. Ask what happens if we find damage under an old coating once we grind it off, ask how pricing changes if the garage measures out bigger than expected, ask exactly what the workmanship warranty covers. A contractor who answers those plainly, standing on your actual concrete, tells you more than any glossy brochure or five-star review ever could.
A lot of McKinney garages we coat aren't just for parking two cars. We see home gyms with rubber flooring rolled out over the coating, workshop bays set up with tool chests and a welding station, and oversized three and four-car garages on the bigger lots toward the edges of town that start to blur the line between a standard garage and a small shop building. Each of those uses changes what we recommend, a floor that sees a squat rack moved in and out regularly needs a coating tough enough to handle repeated abrasion in the same spots, and a workshop with real tool use benefits from the heavier build and extra chemical resistance of The Flagship.
Whatever the space, the estimate is free and the standard doesn't change based on square footage. A two-car garage and a four-bay shop both get the same diamond grind, the same moisture check, and the same honest recommendation on which system actually fits how you use it.
Garage projects have to work around real life, kids' schedules, work-from-home days, a car that needs somewhere to sit for a couple days. We plan the install date with that in mind, and we'll tell you plainly how long your specific garage needs, not a generic two-day estimate that doesn't account for a bigger bay or a slab that needs extra prep. Most McKinney homeowners are back to normal use within the week, often faster, and we'll walk you through the exact timeline before we ever schedule a start date.
Most McKinney garage floors run about $6 to $10 per square foot installed. The Base system starts at $6, The Pro at $8, and The Flagship at $10. Your exact price depends on the size and condition of your concrete, and every estimate is free.
Most residential floors in McKinney are finished in one to two days. We diamond grind the concrete, lay the base coat and flake, then return for the polyaspartic topcoat. You can usually walk on it the next day and park on it within a few days.
Yes. A properly prepped floor resists hot tires, oil, and chemicals, cleans up with a mop, and lasts for years without peeling. In the McKinney heat and clay soil, the prep and moisture barrier we use are what keep it down for the long haul.
Dry, our flake floors have real texture and the polyaspartic topcoat is rated for traction. Any hard floor gets slick when wet, so for extra grip we can add an aluminum oxide anti-slip additive to the topcoat for a little more.
Yes. The Epoxy Company is based in Denison and covers McKinney and the surrounding area. Garages, shops, and barndominiums are what we do best, and estimates are always free. Call 817-818-6925.
We let the work speak. We diamond grind every floor, use quality Simiron and Torginol materials, coat clean out to the door, and back it with a workmanship warranty. Call 817-818-6925 for a free McKinney estimate.
Yes, especially on new construction. A slab can feel dry to the touch while it is still curing and releasing moisture underneath. We test before we coat so we know whether a moisture vapor barrier primer is actually necessary rather than assuming new concrete is automatically ready.
Yes. Removing old, failing coatings is part of our diamond grinding process. We grind the old material off and profile the bare concrete underneath so the new system bonds directly to the slab instead of to whatever is peeling off of it.
Serving McKinney and all of North, East & Central Texas. Call or fill out a quote form, we'll get back to you fast.